So you need Citrix Secure Gateway to accomplish this?  Citrix EOLed that product over 2 years ago....

Hi Tom,

you entered the FQDN of the CSG Srever,but the radio button "DNS Suffix" is selected. Is this a typo?

regards Marc

Hi Tom,

From testing onsite with a customer, it would appear that if you are using ISATAP on the CSG server, this negates the need to add an NRPT entry.

We have a standard NRPT rule for the internal DNS suffix and the CSG hostname is also on the same DNS suffix (and also located internally). We can see client connections to the CSG server using the DA client Teredo address and Citrix applications are fully working.

Thoughts?

Cheers

JJ

Jason.

Could I ask what kind of config you have on your web interface site?

XML Port / http/https/SSLRelay?

Regards

Kristian

It was a pretty standard setup using XML on port 80 from memory. The web interface site was installed on the actual CSG server itself so that we could provide settings for DA clients independently...

Cheers

JJ

Hello Sir

I tried this on server 2012 but dns fails when i put it in the nrpt rules

pls advise

Does anyone know if this works for the Access Gateway Enterprise platform or netscaler as well?  Also the link to the CSG section above appears to be dead:

In configuring the CSG, note should be taken in support.citrix.com/.../index.jsp to use the IPv6 address to listen on.

I'm not sure what you mean by the IPv6 address that needs to be listened on... was hoping a traditional Access Gateway Enterprise/Web Interface implementation would work without too much reconfiguration.

Thanks

Hi All,

The latested NetScaler Gateway (10.1) release supports IPv6 on the outside address and can translate this to IPv4 XenApp / XenDesktop / WI / StoreFront servers on the insite. This might help some deployments.

Kind regards,

Matthijs

Hi guys,

followed these instructions to get XA 6.5 up & running succcessfully. How about XD 7 and Direct Access ? - Will I need to buy NS just to get users launching any application ?

Any information, suggesttions available `?

best,

Frank

Matthijs wrote:

"The latested NetScaler Gateway (10.1) release supports IPv6 on the outside address and can translate this to IPv4 XenApp / XenDesktop / WI / StoreFront servers on the insite. This might help some deployments"

Yes, this was a great news, specially for using Storefront, because we could not find a way to tell Storefront to go through AGEE when it is connections from internal networks (DA tunnel)

Is it anybody who knows how this configuration should look like?

Hi everyone. I knew that Store front already support IPv6, thats correct? I need to eliminate the CSG this because is causing problems now.

Regards...

We have XD 7.5 environment , but still unable to launch Desktops via Direct Access Client .. I see i dont get ping from Broker server from DA client , other citrix server i am able to get ipv6 response ...any clue what could be the issue ?