This posting is provided "AS IS" with no warranties, and confers no rights.The opinions expressed herein are my own personal opinions and do not represent my employer's view in anyway. Please use the Microsoft Forums for support requests.
One of the big improvements with the release of Office Communications Server (OCS) 2007 R2 was the new Device Update Service, much more simple than the previous version. Goodbye Windows SharePoint Services on a different server, no more additional complexity in order to update the UC devices deployed in an organization. Now, the Device Update Service is automatically installed on the Web Components Server, which is part of the Front-end server, on a consolidated topology (the only one supported in R2).
Device Update Service supports two types of UC devices: OCS 2007 R2 Communicator Phone Edition (OCPE or Tanjay) and RoundTable (must be manually configured).
Device Update Service is mostly used to upgrade OCPE phones (LG-Nortel IP8540, Polycom CX700 and older Microsoft branded), so one could expect this process to be the most common cause of troubles and frustration. And that is, in fact, the case! Now even more, since there is a new version of the firmware for OCS 2007 R2.
Before we dive into the troubleshooting process, let us know better the Device Update Service Architecture and how it works:
In the default configuration, Communicator Phone Edition connects to Device Update Service in the following manner:
The latest firmware version, (3.5.6907.0, by the time this post was written), can be downloaded from the Microsoft site. The downloaded file is a self-extracting executable that contains a .cab archive with all the supported phones.
In order to upload the update file, we must run the Device Update Service Management Console: open the OCS R2 Management Console, right click the pool and select Device Updater. From the Tools menu, click Upload .cab File, navigate to the .cab file that you want to upload, and then click Open.
Check the Pending tab of the Device Update Service Management Console to verify that the new update is listed.
You can also verify that the upload process went OK by checking the shared updates folder (if you’re using Enterprise edition). For the Standard edition, the default path is %ProgramFiles%\Microsoft Office Communicator 2007 R2\Web Components\DeviceUpdateFiles. There should be a folder hierarchy like the one depicted in the following picture. Note that there are some Logs folders that I’ll cover a little bit ahead.
After the update file is uploaded, the corresponding firmware can be approved for all devices in the organization by selecting it and then clicking Approve. The revision should be more recent than the revision for the last update the UC devices received.
Prior to making the update widely available, it is recommended that you test it on some devices. To add a test device, go to the Test Devices tab, click Add, type a Friendly Name and then fill up the MAC address or serial number of the device (there’s no need to approve the update).
Restart the device and that should trigger the update process, as described before.
If the previous version of the device is less than 1.0.522.98, it will first get updated to an interim build (1.0.522.103) that comes with OCS 2007 R2. This means that, in this case, 2 upgrade cycles are necessary before the device gets the approved/pending build.
You can use the logs in the Logs\Server\Audit\imageUpdates\ folder to audit software update requests from UC devices. There you can find some files named RequestHandlerAuditLog_<server_name>_<date>.log with the information you need to troubleshoot the update service. You can view server log files in a text editor or Microsoft Excel.
In the following example, an LG-Nortel device with version 1.0.522.34 is configured as a test device and will receive the most up-to-date firmware. Since 1.0.522.34 is lower than 1.0.522.98, the device must first be upgraded to the interim version (1.0.522.103), then reboot and finally it receives the most recent version available on the server.
Logging DateTime,User Name,User Host Address,Device Type,Request DateTime,Mac Address,Serial Number,Vendor,Model,Revision,Locale,Requested<FileName;Version;TimeStamp>[# Seperated for Multiple],Response<FileName;Version;TimeStamp>[# Seperated for Multiple]
03-06-2009 17:07:20,firstname.lastname@example.org,10.1.1.123,UCPhone,06-03-2009 09:07:20,"0021630F207B","C185H001209","LG-Nortel","IP8540","A","ENU",cpe.nbt;0.0.0.0;01-01-1601 00:00:00,
03-06-2009 17:10:39,email@example.com,10.1.1.123,UCPhone,06-03-2009 17:10:39,"0021630F207B","C185H001209","LG-Nortel","IP8540","A","ENU",cpe.nbt;0.0.0.0;01-01-1601 00:00:00,http://ocs.demo.local/DeviceUpdateFiles_Int/OCInterim/ENU/CPE.nbt;1.0.522.103;16-12-2008 04:43:58
03-06-2009 17:18:54,firstname.lastname@example.org,10.1.1.123,UCPhone,06-03-2009 17:18:53,"0021630F207B","C185H001209","LG-Nortel","IP8540","A","ENU",cpe.nbt;1.0.522.103;16-12-2008 04:43:58,http://ocs.demo.local/DeviceUpdateFiles_Int/UCPhone/LG-Nortel/IP8540/A/ENU/3.5.6907.0/CPE/CPE.nbt;3.5.6907.0;16-12-2008 04:43:58
In the first line, the device gets in-band provisioning information from the server or Enterprise pool hosting the device user account. After a *manual reboot*, on the second line, it gets the interim version. Finally, on the third line, and after an *automatic reboot* (notice the 8 minute gap) the phone receives the 3.5.6907.0 version.
But besides the logs from the update service,the IIS logs can be extremely valuable to the troubleshooting process. This is the corresponding IIS log from the example above (I removed some unnecessary lines):
#Software: Microsoft Internet Information Services 7.0
#Date: 2009-03-06 16:00:51
#Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status time-taken
2009-03-06 17:07:20 10.1.1.90 POST /RequestHandler/ucdevice.upx - 443 - 10.1.1.123 Microsoft+UCPhone+Device 200 0 0 124
2009-03-06 17:10:39 10.1.1.90 POST /RequestHandler/ucdevice.upx - 443 - 10.1.1.123 Microsoft+UCPhone+Device 200 0 0 171
2009-03-06 17:12:57 10.1.1.90 GET /DeviceUpdateFiles_Int/OCInterim/ENU/CPE.nbt - 80 - 10.1.1.123 Microsoft+UCPhone+Device 200 0 0 137810
2009-03-06 17:12:57 10.1.1.90 GET /DeviceUpdateFiles_Int/OCInterim/ENU/CPE.cat - 80 - 10.1.1.123 Microsoft+UCPhone+Device 200 0 0 15
2009-03-06 17:18:54 10.1.1.90 POST /RequestHandler/ucdevice.upx - 443 - 10.1.1.123 Microsoft+UCPhone+Device 200 0 0 187
2009-03-06 17:21:45 10.1.1.90 GET /DeviceUpdateFiles_Int/UCPhone/LG-Nortel/IP8540/A/ENU/3.5.6907.0/CPE/CPE.nbt - 80 - 10.1.1.123 Microsoft+UCPhone+Device 200 0 0 170679
2009-03-06 17:21:45 10.1.1.90 GET /DeviceUpdateFiles_Int/UCPhone/LG-Nortel/IP8540/A/ENU/3.5.6907.0/CPE/CPE.cat - 80 - 10.1.1.123 Microsoft+UCPhone+Device 200 0 0 15
Notice the line where the interim file CPE.nbt is downloaded to the phone. It takes some time (137.810 ms), because the file has a few megs.
2009-03-06 17:12:57 10.192.32.90 GET /DeviceUpdateFiles_Int/OCInterim/ENU/CPE.nbt - 80 - 10.1.1.123 Microsoft+UCPhone+Device 200 0 0 137810
And then, notice the line where the phone requests the most recent version available. It took 170.679 ms to download the file.
2009-03-06 17:21:45 10.192.32.90 GET /DeviceUpdateFiles_Int/UCPhone/LG-Nortel/IP8540/A/ENU/3.5.6907.0/CPE/CPE.nbt - 80 - 10.1.1.123 Microsoft+UCPhone+Device 200 0 0 170679
Now that we have a pretty good understanding of the Device Update Service, what can we do if something doesn’t go as expected? Let’s look at the troubleshooting process:
2009-03-06 12:35:36 10.1.1.90 GET /DeviceUpdateFiles_Int/UCPhone/LG-Nortel/IP8540/A/ENU/3.5.6907.0/CPE/CPE.nbt - 80 - 10.1.1.1 Microsoft+UCPhone+Device 500 19 5 62
And this pretty much covers the troubleshooting process for the OCPE devices. I would like to hear from you if you have ever encountered a distinct situation that you managed to solve in a different way.