A blog by Jose Barreto, a member of the File Server team at Microsoft.
All messages posted to this blog are provided "AS IS" with no warranties, and confer no rights.
Information on unreleased products are subject to change without notice.
Dates related to unreleased products are estimates and are subject to change without notice.
The content of this site are personal opinions and might not represent the Microsoft Corporation view.
The information contained in this blog represents my view on the issues discussed as of the date of publication.
You should not consider older, out-of-date posts to reflect my current thoughts and opinions.
© Copyright 2004-2012 by Jose Barreto. All rights reserved.
Follow @josebarreto on Twitter for updates on new blog posts.
For the last few years, I’ve been blogging about the Microsoft iSCSI Software Target and its many uses related to Windows Server Failover Clustering, Hyper-V and other server scenarios. Today, Microsoft has made this software publicly available to all users of Windows Server 2008 R2.
The Microsoft iSCSI Software Target has been available for production use as part of Windows Storage Server since early 2007. It has also been available for development and test use by MSDN and TechNet subscribers starting in May 2009. However, until now, there was no way to use the Microsoft iSCSI Software Target in production on a regular server running Windows Server 2008 R2. This new download offers exactly that.
Now available as a public download, the software is essentially the same software that ships with Windows Storage Server 2008 R2. Windows Storage Server 2008 R2 and the public download package will be refreshed (kept in sync) with any software fixes and updates. Those updates are described at http://technet.microsoft.com/en-us/library/gg232597.aspx.
This release was preceded by intense testing by the Microsoft iSCSI Target team, especially in scenarios where the iSCSI Target is used with Hyper-V and with Windows Server Failover Clusters. We do imagine these to be amongst the most commons deployment scenarios.
Testing included running the Microsoft iSCSI Software Target in a two-node Failover Cluster and configuring 92 individual Hyper-V VMs, each running a data intensive application and storing data on a single node of that iSCSI Target cluster. The exciting part of the test was to force an unplanned failure of the iSCSI Target node being used by all the VMs and verify that we had a successful failover to the other node with all 92 VMs continuing to run the application without any interruption.
How to download and install
To download the Microsoft iSCSI Software Target 3.3 for Windows Server 2008 R2, go to http://www.microsoft.com/downloads/en/details.aspx?FamilyID=45105d7f-8c6c-4666-a305-c8189062a0d0 and download a single file called “iSCSITargetDLC.EXE”. (Note: This was just released at 10AM PST on 04/04/2011, so the download might still be replicating to your closest download server. If the link does not work, try again later). This is a self-extracting archive that will show this screen when run:
Select a destination folder and click “Install”. Once it finishes, you will find a few files available to you in that folder:
If you click on the index.htm file on the main folder, you will see the welcome page with a few links to the items included:
To install the iSCSI Target on a computer running Windows Server 2008 R2, simply run the “iscsitarget_public.msi” MSI file from a command line or right-click it on Windows Explorer and choose “Install”.
Frequently Asked Questions (FAQ)
Q: Can I install the Microsoft iSCSI Software Target 3.3 on Windows Server 2008 or Windows Server 2003? A: No. The Microsoft iSCSI Software Target 3.3 can only be installed on Windows Server 2008 R2.
Q: Can I install the Microsoft iSCSI Software Target on Windows Server 2008 R2 with Service Pack 1 (SP1)? A: Yes. In fact, that’s what is recommended.
Q: Can I install the Microsoft iSCSI Software Target on a Core install of Windows Server 2008 R2? A: No. The Microsoft iSCSI Software Target 3.3 is only supported in a Full install.
Q: I don’t have a copy of Windows Server 2008 R2. Where can I get an evaluation copy? A: You download an evaluation version of Windows Server 2008 R2 with Service Pack 1 from http://technet.microsoft.com/en-us/evalcenter/dd459137.aspx
Q: Where is the x86 (32-bit) version of the Microsoft iSCSI Software Target 3.3? A: The Microsoft iSCSI Software Target 3.3, is provided in only in an x64 (64-bit) version, as is Windows Server 2008 R2,
Q: What are these “iSCSITargetClient” MSI files included in the download? A: Those are the optional VSS and VDS providers for the Microsoft iSCSI Software Target 3.3. You should install them in the same computer that runs the iSCSI Initiator if you intend to use VSS or VDS. For details on VSS, see http://blogs.technet.com/b/josebda/archive/2007/10/10/the-basics-of-the-volume-shadow-copy-service-vss.aspx. For details on VDS, see http://blogs.technet.com/b/josebda/archive/2007/10/25/the-basics-of-the-virtual-disk-services-vds.aspx.
Q: Where is the Windows Storage Server 2008 R2 documentation? A: There is some documentation inside the package. Additional documentation is available on the web at http://technet.microsoft.com/en-us/library/gg232606.aspx
Q: Can I use the Microsoft iSCSI Software Target 3.3 as shared storage for a Windows Server Failover Cluster? A: Yes. That is one of its most common uses.
Q: Can I install the Microsoft iSCSI Software Target 3.3 in a Hyper-V virtual machine? A: Yes. We do it all the time.
Q: Can I use the downloaded Microsoft iSCSI Software Target 3.3 in my production environment? A: Yes. Make sure to perform the proper evaluation and testing before deploying any software in a production environment. But you knew that already…
Q: What are the support policies for the Microsoft iSCSI Software Target 3.3 on Windows Server 2008 R2?A: The support policies are listed at http://technet.microsoft.com/en-us/library/gg983493.aspx
I would recommend that you download and read my previous blog posts about the Microsoft iSCSI Software Target. Here are some of the most popular ones.
Please keep in mind that some of these posts mention previous versions of the Microsoft iSCSI Software Target that ran on different Windows Server versions. The overall guidance, however, still applies.
I hope you are as excited as we are about this release. Download it and experiment with it. And don’t forget to post a comment about your experience or send us your feedback.
Today, Microsoft has made this software publicly available to all users of Windows Server 2008 R2. The
The Microsoft iSCSI Software Target has been available for production use as part of Windows Storage
Can't get download link.
How can I force it to install on Windows 7?
YES !!! Microsoft is releasing the iSCSI Target Server and that means that you now can use a Windows
Sorry, forget my last post, I see that you tested an iSCSI target failover - that is great! Now I'm just wondering about support for 3rd party cluster disk resources to enable shared nothing iSCSI target clusters and multisite clusters. Thanks again!
Today, Microsoft has made the Microsoft iSCSI Software Target 3.3 publicly available to all users of
How about releasing SIS component (Windows6.1-KB976833-x64-SIS.msu) for free to public?
I'm confused. Is it free for use or is it some part of storage server upgrade/evaluation ??
FYI. Twitter is blowing up about about this, so I figured I'd post on what it does. This install file brings the functionality that is in Windows Storage Server to all Windows Server 2008 R2 boxes. The biggest win, you...
Nagyon jó hír, szerintem ennyi sok év kínlódás után igen sokan lesznek akik majd értékelik. A részletek
Virtualization Nation, One common refrain we hear from you is that you appreciate the fact we’re
iSCSI Target이라고 아시나요? 보통 장애 조치 클러스터나 Hyper-V의 Quick Migration, Live Migration 등을 테스트하시거나, 간단히 현업 환경에서