SNW Demo: Windows Server 2008 Core, Hyper-V and Failover Clustering - with screenshots

SNW Demo: Windows Server 2008 Core, Hyper-V and Failover Clustering - with screenshots

  • Comments 7
  • Likes

I spent last week in Orlando, Florida, working at the Microsoft booth in the Storage Networking World. I delivered one of the demos there and my demo included the following technologies:

  • Windows Unified Data Storage Server 2003 iSCSI Software Target
  • Windows Server 2008 Core Install
  • Windows Server 2008 iSCSI Initiator
  • Windows Server 2008 Hyper-V
  • Windows Server 2008 Failover Clustering

The main goal of the demo was to show how to configure highly available virtual machines.

Demo Configuration 

We had two servers running Windows Server 2008 Core, both with the Hyper-V role installed and connected to an iSCSI Software Target, running WUDSS 2003. These two Windows Server 2008 Core servers were configured as a Failover Cluster using the iSCSI SAN as shared storage. We used a third Windows Server 2008 with a Full install to remotely manage the Failover Cluster and Hyper-V. Here's a little diagram of what it looked like:

 

To further simplify things, I created a single custom MMC (Microsoft Management Console) with all the snap-ins I needed during the demo, including:

  • Remote Desktop (to access the WUDDS Server GUI and the command-line UI in the two Hyper-V nodes)
  • Computer Management (two instances, one for each of the two Hyper-V nodes)
  • Hyper-V Management
  • Failover Cluster Management

Demo Steps 

The demo steps included:

  • Checking the WUDSS configuration
  • Checking the Hyper-V Node 1 configuration via command line
  • Checking the Hyper-V Node 1 configuration via remote Computer Management MMC
  • Creating a new Virtual Machine on Node 1
  • Making the Virtual Machine Highly Available
  • Moving the Highly Available Virtual Machine to Node 2 

Demo Screenshots 

Below are some screenshots I took during the event, showing the most relevent steps:

Checking the WUDSS configuration

The screenshot below shows the Management Server accessing the WUDDS box via a Remote Desktop. The WUDDS screen is just the center pane of the screen, with "Windows Unified Data Storage Server" on the title bar). It highlights the typical cluster configuration of a Microsoft iSCSI Software Target, exposing a set of LUNs to a set of Windows Servers. Note that we chose to identify the servers by IP address (we could also use other methods, like IQN, DNS name or MAC address). These two nodes are the two Hyper-V servers running Windows Server 2008 Core. It is also interesting to review the set of snap-ins included in the main custom MMC. 

SNWD01

Checking the Node 1 configuration via command line

The next two screenshots show the Management Server accessing the Hyper-V node 1, running Windows Server 2008 Core. As expected, all we get is a command-line interface.

This first screenshot (Server Core UI is the green area only) shows network and firewall configuration, queried via netsh.exe.

SNW Demo 02

This second screenshot (Server Core UI is the green area only) shows the built-in iSCSI initiator configuration (via iscsicli.exe) and the disks/volumes exposed to the server (via diskpart.exe).

SNW Demo 03 

Checking the Node 1 configuration via remote MMC

For those that prefer a GUI, the screenshot below uses a remote MMC to show the same disk and volume information, this time using a Computer Management MMC to connect to the Server Core box.

SNW Demo 04

Creating a new Virtual Machine on Node 1

Next, we have a few screenshots showing how to create a Hyper-V Virtual Machine. We use a remote Hyper-V MMC to access node 1.

This first screen shows a step of the "New Virtual Machine Wizard" where you specify the location of the Virtual Machine configuration. Note that the folder used is in the E: drive, which is one of the iSCSI LUNs.

SNW Demo 06 

This second screen shows another step of the "New Virtual Machine Wizard" where you specify the location of the Virtual Hard Drive (VHD file) used. Again we use the E: drive here.

SNW Demo 07 

This third screen shows the final state with the VM fully configured. You can also see that we are managing Hyper-V via an MMC connected remotely to a Server Core box. Note that the Virtual Machine is still not running at this point.

SNW Demo 08 

Making the Virtual Machine Highly Available

Next we have a few screenshots showing the steps to make the VM highly available. We again use a remote MMC (this time the Failover Cluster Management MMC) to connect to the cluster (composed of the two Hyper-V nodes).

This first screen shows the "Configure a Service or Application" wizard (a.k.a. "High Availability Wizard") when we select the service to configure for high availability.

SNW Demo 10 

This second screen shows the moment in that wizard when we select the existing VM on node 1.

SNW Demo 11

This third screen shows the final state, with the HA VM already started on node 1. You can verify that we are managing the Failover Cluster via a remote MMC. Note that the wizard automatically figured the dependency on the Cluster Disk E:.

SNW Demo 12 

Moving the Highly Available Virtual Machine to Node 2

The last set of screenshots shows how to move the VM from Node 1 to Node 2, by simply selecting the option to "Move service or application to another node". This starts the process to save the state of the VM on node 1, move the resources to Node 2 and restore the VM on node 2.

This first screen shows the VM being saved on node 1, right after we started the move.

SNWD14

This second screen shows a moment when the Cluster Disk is already online on node 2 and the VM is being restored.

SNWD15

This last screen shows the VM online on node 2, after the move is completed.

SNWD16

Note that the entire process takes just a few seconds and I actually had to repeat it a few times (moving the VM back and forth between nodes) to be able to capture all the screens. The messages would just fly off the screen before I could press "PrtScr", paste the image and come back for more.

Additional Comments and References

Please note that the configuration used was not fully fault tolerant. For instance, there was only one Ethernet switch. It was a demo, you know :-) . If you want to see more examples of configurations, including some that are fully fault tolerant, check my other post at: http://blogs.technet.com/josebda/archive/2007/12/07/high-availability-scenarios.aspx

Also note that is only one of the many ways to expose storage to a Hyper-V server and its child partitions. To see additional options, check my other two posts at http://blogs.technet.com/josebda/archive/2008/02/14/storage-options-for-windows-server-2008-s-hyper-v.aspx and http://blogs.technet.com/josebda/archive/2008/03/06/more-on-storage-options-for-windows-server-2008-s-hyper-v.aspx.

This is an updated and more detailed version of a post I created before the event, which is posted at http://blogs.technet.com/josebda/archive/2008/04/05/snw-demo-windows-server-2008-core-hyper-v-and-failover-clustering.aspx.

Your comment has been posted.   Close
Thank you, your comment requires moderation so it may take a while to appear.   Close
Leave a Comment
  • Jose Barreto has posted a detailed blog post with many screenshots walking you through his demo setup

  • ...can be found in this blog post: http://blogs.technet.com/josebda/archive/2008/04/14/snw-demo-windows-server-2008-core-hyper-v-and-failover-clustering-with-screenshots.aspx. Plenty of screen shots there too to get you going....

  • There are many ways to implement Windows Server Failover Clustering with Hyper-V. I could actually find

  • Hyper-V is here! As you can confirm on the press release linked below, the final release of Windows Server

  • (updated 7/23/08) My current project involves being the only dedicated technical resource on the Virtualization

  • (updated 8/26/08) My current project involves being the only dedicated technical resource on the Virtualization

  • Here's my obscenely vast list of resources that I actually do reference and send to customers on a very