John Bailey

Microsoft | Support Escalation Engineer | Exchange | Office 365

O365: On-Premises Transport Queuing Lessons Learned from CBL

O365: On-Premises Transport Queuing Lessons Learned from CBL

  • Comments 7
  • Likes

I recently had a case where on-premises Transport had Queues that were 'stuck' going to the cloud. Specifically, they were going to Exchange Online Protection for routing from on-premises to cloud mailboxes. The on-premises transport servers were generating errors, in a unique way. For example, this is what we saw from the Queues in PowerShell:

(Get-TransportServer | Get-Queue | Where{$_.NextHopDomain -ilike '<cloud domain>'}  | Select LastError -Unique).LastError

451 4.4.0 Primary target IP address responded with: "451 5.7.3 Must issue a STARTTLS command first." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.

This error is highly deceptive because it could be inferred that the client is not issuing a STARTTLS to the remote endpoint in the cloud; however, when we looked at the SMTP Send protocol logs, we could clearly see the inverse was true:

<Server>.mail.protection.outlook.com Microsoft ESMTP MAIL Service ready at Fri, 6 Dec 2013 21:54:51 +0000",
2013-12-06T21:54:51.891Z,Outbound to Office 365,08D0C0DE40C1BF74,3,x.x.x.x:64526,x.x.x.x:25,>,EHLO <on-premises domain>,
2013-12-06T21:54:52.001Z,Outbound to Office 365,08D0C0DE40C1BF74,4,x.x.x.x:64526,x.x.x.x:25,<,250-<Server>.mail.protection.outlook.com Hello [External I.P. Address of Client],
2013-12-06T21:54:52.001Z,Outbound to Office 365,08D0C0DE40C1BF74,5,x.x.x.x:64526,x.x.x.x:25,<,250-SIZE 157286400,
2013-12-06T21:54:52.001Z,Outbound to Office 365,08D0C0DE40C1BF74,6,x.x.x.x:64526,x.x.x.x:25,<,250-PIPELINING,
2013-12-06T21:54:52.001Z,Outbound to Office 365,08D0C0DE40C1BF74,7,x.x.x.x:64526,x.x.x.x:25,<,250-DSN,
2013-12-06T21:54:52.001Z,Outbound to Office 365,08D0C0DE40C1BF74,8,x.x.x.x:64526,x.x.x.x:25,<,250-ENHANCEDSTATUSCODES,
2013-12-06T21:54:52.001Z,Outbound to Office 365,08D0C0DE40C1BF74,9,x.x.x.x:64526,x.x.x.x:25,<,250-AUTH,
2013-12-06T21:54:52.001Z,Outbound to Office 365,08D0C0DE40C1BF74,10,x.x.x.x:64526,x.x.x.x:25,<,250-8BITMIME,
2013-12-06T21:54:52.001Z,Outbound to Office 365,08D0C0DE40C1BF74,11,x.x.x.x:64526,x.x.x.x:25,<,250-BINARYMIME,
2013-12-06T21:54:52.001Z,Outbound to Office 365,08D0C0DE40C1BF74,12,x.x.x.x:64526,x.x.x.x:25,<,250 CHUNKING,
2013-12-06T21:54:52.001Z,Outbound to Office 365,08D0C0DE40C1BF74,13,x.x.x.x:64526,x.x.x.x:25,*,,Connector is configured to send mail only over TLS connections and remote doesn't support TLS
2013-12-06T21:54:52.001Z,Outbound to Office 365,08D0C0DE40C1BF74,14,x.x.x.x:64526,x.x.x.x:25,>,QUIT,

Ah, so the STARTTLS command is not available from the remote endpoint. Since TLS is required for this send connector, this is why we're queuing.

Let's double-check our math and our sanity, really quick. I use nslookup to query for the MX record of the cloud domain and telnet to port 25 on one of the I.P. addresses. So far, so good. I issue 'EHLO <on-premises domain>' and get this response:

<I.P. Address> - 220 <Server>.mail.protection.outlook.com Microsoft ESMTP MAIL Service ready at Fri, 6 Dec 2013 22:01:59 +0000
EHLO <on-premises domain> 250-<Server>.mail.protection.outlook.com Hello [External I.P. Address of Client]
250-SIZE 157286400
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-AUTH
250-8BITMIME
250-BINARYMIME
250 CHUNKING

Sure enough, 'STARTTLS' isn't an available ESMTP verb. O.k., but why?

Well, as it turns out, we use public block lists and this company was cited by CBL for RWBL and XBL; specifically, Pushdo was being used to perform a DDoS against port 80 on webservers from an infected machine behind their public I.P. address.

As soon as they were listed, we removed STARTTLS (and other ESMTP verbs).

The customer discovered it was probably a visitor (CBL lists time of last activity) and as it had been over 8 hours, delisted themselves. Immediately, TLS was available for use, again.

  • Can you please elaborate a bit more, i'm facing the same issue.

    When i check at spamhaus i'm on a PBL so this would be the problem?

    As my ISP placed my ip subnet on the PBL at spamhaus i cannot be removed from the PBL list.

    My ISP is offering a smarthost but then mail also is not leaving the exchange server to office 365.

  • @Tajeesh: You can remove yourself from the PBL. Pay close attention to the bullet-points, as we have no influence/control over Spamhaus' policies.

    www.spamhaus.org/.../removal

    If your ISP has placed you on the PBL, was a reason given?

  • John, thanks for the prompt reply!

    Unfortunately i have an ISP with dynamic IP's and thus my ISP has his whole subnet added to SpamHaus PBL.

    I cannot be removed from the PBL as that option is not available on SpamHaus.

    "Removal Procedure, Removal of IP addresses within this range from the PBL is not allowed by the netblock owner's policy."

    My ISP provides a smarthost to send mail but when i add the smarthost to the Exchange on-premise to Office 365 Send Connector i still get the same error message

    "451 4.4.0 Primary target IP address responded with: "451 5.7.3 Must issue a STARTTLS command first." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts."

    Any idea how this can be fixed when using a smarthost?

  • I am having the same problem, and cannot be removed from SpamHaus. I cannot send mail from O365 to onprem cause of this, please help us

  • @Tajeesh - Is the smarthost in the dynamic IP pool, as well? If so, this will be why you do not have the 'STARTTLS' command. @Keith - Why is your IP on SpamHaus?

  • I have a DHCP IP address from my ISP, cannot remove it

  • @Anonymous - You will need to get a static IP address, that is not in the dynamic pool, from your ISP.

Your comment has been posted.   Close
Thank you, your comment requires moderation so it may take a while to appear.   Close
Leave a Comment