See all of the top support solutions for our most common issues here
Just a heads up on a new ConfigMgr 2007 Knowledge Base article we published today. If you do any work with Operating System Deployment (OSD) then you'll want to check this one out:
When trying to create Stand-alone media, Bootable media, or Capture media on a USB Flash drive via the Microsoft System Center Configuration Manager 2007 (ConfigMgr 2007) console, the Task Sequence Media Wizard fails with the following message:
Error creating media. Error message is: The parameter is incorrect.. Please refer to CreateTSMedia.log to get details.
Inspecting the CreateTsMedia.log shows the following errors:
Beginning media generation CreateTsMedia Failed to create media (0x80070057) CreateTsMedia CreateTsMedia failed with error 0x80070057, details="" CreateTsMedia
Creating the USB media in a ConfigMgr 2007 console running on other PCs may be successful and may not reproduce the problem.
The problem is a known issue with ConfigMgr 2007 SP2 and older, including R2 and R3, when the following conditions exist on the PC running the ConfigMgr 2007 console:
1. A mapped network drive exists on the PC
2. The PC's hard drive has a partition with no drive letter attached to it
Condition #2 above is very common in Windows 7 and Windows Server 2008 R2 since the default installation of Windows 7 creates the boot partition as a "hidden" system partition with no drive letter attached to it. It is also a common configuration on PCs that have been encrypted with BitLocker. For this reason the issue is seen most often on Windows 7, Windows Server 2008 R2, and PCs that have drives encrypted with BitLocker.
To work around the problem, take one of the following two actions before trying to create the USB media via the ConfigMgr 2007 console:
1. Temporarily disconnect mapped network drives.
2. Via the Computer Management console, temporarily assign a drive letter to the "hidden" partition.
Only one of the above two actions needs to be taken. Both do not need to be taken.
Once the USB media has been created, mapped network drives can be reconnected and/or the assigned drive letter can be removed from the previously hidden partition.
For the latest version of this article see the link below:
KB2471018 - Creating OSD USB deployment media in System Center Configuration Manager 2007 fails with "The parameter is incorrect"
J.C. Hornbeck | System Center Knowledge Engineer
The App-V Team blog: http://blogs.technet.com/appv/ The WSUS Support Team blog: http://blogs.technet.com/sus/ The SCMDM Support Team blog: http://blogs.technet.com/mdm/ The ConfigMgr Support Team blog: http://blogs.technet.com/configurationmgr/ The SCOM 2007 Support Team blog: http://blogs.technet.com/operationsmgr/ The SCVMM Team blog: http://blogs.technet.com/scvmm/ The MED-V Team blog: http://blogs.technet.com/medv/ The DPM Team blog: http://blogs.technet.com/dpm/ The OOB Support Team blog: http://blogs.technet.com/oob/ The Opalis Team blog: http://blogs.technet.com/opalis
<p>We have seen this issue for a long while .. what we do is create an ISO instead and then extract it to a USB key..</p>
<p>That solution will work for Vista and newer, but may cause issues when deploying Windows XP or Windows Server 2003.</p>