Step-By-Step: Building Your Own Lab on Windows Server 2012 R2

Step-By-Step: Building Your Own Lab on Windows Server 2012 R2

  • Comments 2
  • Likes

 

 

CANITPRO Camps have started with events already taking place across this great nation.  Many who attend the said Camps are appreciative for the time made available through labs to learn the advantages hands on offerings such as Windows Server 2012 R2.  Frequently the question in regards to how an attended can setup their own lab is brought forward.  To setup your Windows Server 2012 R2 lab machine be sure to keep the following PC requirements in mind:  

  • Windows Vista, Windows 7 or Windows 8 as installed OS
  • 64-bit capable hardware (x64)
  • Intel-VT or AMD-V support in firmware
  • Hardware-assisted memory protection in firmware (XD)
  • At least 4GB total RAM
  • At least 60GB free space on HDD
  • Full Administrator Rights to existing PC OS
  • No disk encryption or pre-boot authentication

Step 1: Setting Up Your Lab

NOTE: This process installs Windows Server 2012 in a dual-boot scenario using Boot-to-VHD features in Windows Vista, Windows 7 and Windows 8.  While this process is
not intended to disrupt your existing OS installation, these steps are for use at your own risk.  No support or warranties are implied or provided.

 

  1. Backup your existing PC operating system before beginning this process.  While this process is not intended to disrupt the existing OS installation on your PC, performing a backup before any system upgrades or installation is recommended as a precaution.
     
  2. Download the Windows Server 2012 R2 installation bits in VHD format
     

  3. Extract the downloaded VHD file by running the compressed .EXE file.
          
  4. Copy the Extracted VHD file to C:\BootVHD\Server2012.vhd
          
  5. Mount the copied VHD file as a virtual Drive Letter
     
  6. Right-click on the "Command Prompt" shortcut and select "Run as Administrator"
     
  7. Run "DISKPART.EXE" from the Command Prompt
     
  8. At the "DISKPART>" prompt type the following commands, pressing Enter after each:

               SELECT VDISK FILE="C:\BootVHD\Server2012.vhd"

               ATTACH VDISK

               EXIT


          
  9. Allow the VHD file to be mounted as new Drive Letter.  When completed, this new drive letter will appear in both My Computer and Windows Explorer
          
  10. Add a new OS Boot Menu Choice for Windows Server 2012
     
  11. Right-click on the "Command Prompt" shortcut and select "Run as Administrator"
     
  12. Run "BCDBOOT <mounted_drive_letter>:\WINDOWS" from the Command Prompt

  13. Reboot and select "Windows Server 2012" for the OS Boot Menu displayed
     

Once completed, the fully fictional lab can now provide further assistance in your learning.  To add, take advantage of Microsoft Virtual Academy to gain further insight and training on Microsoft's server OS offering.

 

Your comment has been posted.   Close
Thank you, your comment requires moderation so it may take a while to appear.   Close
Leave a Comment
  • can u do this on win home premium?//

  • Hi Geni,

    The Boot from VHD is only supported from Windows Pro and Enterprise.

    Good luck!

    M