Windows 7 Boot From VHD

  • Comments 9
  • Likes

I posted this to my other blog, thelazyadmin.com but thought it might be useful to post here as well.

One of a new features in Windows 7 and Windows Server 2008 R2 is the ability to boot from a VHD.  It is pretty simple to enable this feature and have it ready at your disposal!  Before you begin you should note the following…

  • You can only boot a Windows 7 or Windows Server 2008 R2 VHD
  • You must configure the boot editor from a Windows 7 or Server 2008 R2 install
  • You cannot use a Virtual PC VHD, I suggest a Hyper-V VHD
  • You need to start with a clean slate, don’t try and reuse an old VHD

I am sure this will change as Windows 7 goes through the beta and RC stages on its way to RTM and we’ll update this as necessary but here goes…

Start by launching a Command Prompt and be sure to run as Administrator, once that is done run the following commands…

bcdedit /copy {current} /d “Boot_From_VHD”

Copy the CSLID that is displayed and then run…

bcdedit /set {CLSID} device vhd=[C:]\vhdname.vhd

bcdedit /set {CLSID} osdevice vhd=[C:]\vhdname.vhd

bcdedit /set {CLSID} detecthal on 

You can replace [C:]\vhdname.vhd with the path and name of your VHD.

Once that is complete reboot and you will have the option to “Boot_From_VHD”!  You can verify the bootloader is configured correctly with the bcdedit command which will list all the boot options.  If you want to delete the entry make note of the GUID listed in bcdedit and use the following command…

bcdedit /delete {GUID} /cleanup

For more information be sure to check out the Windows 7 resource page on Technet.com

Your comment has been posted.   Close
Thank you, your comment requires moderation so it may take a while to appear.   Close
Leave a Comment
  • PingBack from http://www.percu.es/blog/arrancar-windows-7-desde-fichero-vhd

  • this is a very cool feature. I created a VHD image of my computer. the VHD of my computer has Windows 2000. i created it because of certain software that cannot be installed under virtual machine. Do you think i can use this VHD with the Windows 7 VHD boot feature?

  • Hi Steven,

    You can only boot Windows 7 or Server 2008 R2 VHDs.  

    Rodney Buike

    IT Pro Advisor

  • i am trying to mount a VHD image and i keep getting an element not found issue. why is that?

  • Hello, you have a typo in your commands, The last one should be:

    bcdedit /set {CLSID} detecthal on

  • Hi Steven,

    I had a typo in the last command that was kindly pointed out by Matthijs and the entry has been corrected :)

    Thanks Matthijs!

    Rodney Buike

    IT Pro Advisor

  • How do you create a clean slate VHD?

  • Hi Harold,

    The easiest way to create a clean VHD is to use WIM2VHD which is a beta tool that will convert a Windows 7 WIM image to a VHD you can boot from.

    http://code.msdn.microsoft.com/wim2vhd

    Rodney Buike

    IT Pro Advisor

  • I had posted this entry on Thelazyadmin.com but after reading a comment asking about a previous post